Experimental assessment of the stress-sensitivity of combined elastic and electrical anisotropy in shallow reservoir sandstones

Seismic and electromagnetic properties are generally anisotropic, depending on the microscale rock fabric and the macroscale stress field. We have assessed the stress-dependent anisotropy of poorly consolidated (porosity of approximately 0.35) sandstones (broadly representative of shallow reservoirs) experimentally, combining ultrasonic (0.6 MHz P-wave velocity, VP, and attenuation 1/QP) and electrical resistivity measurements. We used three cores from an outcrop sandstone sample extracted at 0°, 45°, and 90° angles with respect to the visible geologic bedding plane and subjected them to unloading/loading cycles with variations of the confining (20–35 MPa) and pore (2–17 MPa) pressures. Our results indicate that stress field orientation, loading history, rock fabric, and the measurement scale, all affect the elastic and electrical anisotropies. Strong linear correlations (R2 > 0.9) between VP, 1/QP, and resistivity in the three considered directions suggest that the stress orientation similarly affects the elastic and electrical properties of poorly consolidated, high-porosity (shallow) sandstone reservoirs. However, resistivity is more sensitive to pore pressure changes (effective stress coefficients n > 1), whereas P-wave properties provide simultaneous information about the confining (from VP, with n slightly less than 1) and pore pressure (from 1/QP, with n slightly greater than 1) variations. We found n is also anisotropic for the three measured properties because a more intense and rapid grain rearrangement occurs when the stress field changes result from oblique stress orientations with respect to rock layering. Altogether, our results highlighted the potential of joint elastic-electrical stress-dependent anisotropy assessments to enhance the geomechanical interpretation of reservoirs during production or injection activities

Geophysical early warning of salt precipitation during geological carbon sequestration

Sequestration of industrial carbon dioxide (CO2) in deep geological saline aquifers is needed to mitigate global greenhouse gas emissions; monitoring the mechanical integrity of reservoir formations is essential for effective and safe operations. Clogging of fluid transport pathways in rocks from CO2-induced salt precipitation reduces injectivity and potentially compromises the reservoir storage integrity through pore fluid pressure build-up. Here, we show that early warning of salt precipitation can be achieved through geophysical remote sensing. From elastic P- and S-wave velocity and electrical resistivity monitoring during controlled laboratory CO2 injection experiments into brine-saturated quartz-sandstone of high porosity (29%) and permeability (1660 mD), and X-ray CT imaging of pore-scale salt precipitation, we were able to observe, for the first time, how CO2-induced salt precipitation leads to detectable geophysical signatures. We inferred salt-induced rock changes from (i) strain changes, (ii) a permanent ~ 1.5% decrease in wave velocities, linking the geophysical signatures to salt volume fraction through geophysical models, and (iii) increases of porosity (by ~ 6%) and permeability (~ 7%). Despite over 10% salt saturation, no clogging effects were observed, which suggests salt precipitation could extend to large sub-surface regions without loss of CO2 injectivity into high porosity and permeability saline sandstone aquifers

Core-scale geophysical and hydromechanical analysis of seabed sediments affected by CO2 venting

Safe offshore Carbon Capture Utilization and Storage (CCUS) includes monitoring of the subseafloor, to identify and assess potential CO2 leaks from the geological reservoir through seal bypass structures. We simulated CO2-leaking through shallow marine sediments of the North Sea, using two gravity core samples from ∼1 and ∼2.1 m below seafloor. Both samples were subjected to brine−CO2 flow-through, with continuous monitoring of their transport, elastic and mechanical properties, using electrical resistivity, permeability, P-wave velocity and attenuation, and axial strains. We used the collected geophysical data to calibrate a resistivity-saturation model based on Archie’s law extended for clay content, and a rock physics for the elastic properties. The P-wave attributes detected the presence of CO2 in the sediment, but failed in providing accurate estimates of the CO2 saturation. Our results estimate porosities of 0.44 and 0.54, a background permeability of ∼10−15 and ∼10-17 m2, and maximum CO2 saturation of 18 % and 10 % (±5 %), for the sandier (shallower) and muddier (deeper) sample, respectively. The finer-grained sample likely suffered some degree of gas-induced fracturing, exhibiting an effective CO2 permeability increase sharper than the coarser-grained sample. Our core-scale multidisciplinary experiment contributes to improve the general interpretation of shallow sub-seafloor gas distribution and migration patterns

Pockmarks in the Witch Ground Basin, central north sea

Marine sediments host large amounts of methane (CH4), which is a potent greenhouse gas. Quantitative estimates for methane release from marine sediments are scarce, and a poorly constrained temporal variability leads to large uncertainties in methane emission scenarios. Here, we use 2‐D and 3‐D seismic reflection, multibeam bathymetric, geochemical, and sedimentological data to (I) map and describe pockmarks in the Witch Ground Basin (central North Sea), (II) characterize associated sedimentological and fluid migration structures, and (III) analyze the related methane release. More than 1,500 pockmarks of two distinct morphological classes spread over an area of 225 km2. The two classes form independently from another and are corresponding to at least two different sources of fluids. Class 1 pockmarks are large in size (>6 m deep, >250 m long, and >75 m wide), show active venting, and are located above vertical fluid conduits that hydraulically connect the seafloor with deep methane sources. Class 2 pockmarks, which comprise 99.5% of all pockmarks, are smaller (0.9–3.1 m deep, 26–140 m long, and 14–57 m wide) and are limited to the soft, fine‐grained sediments of the Witch Ground Formation and possibly sourced by compaction‐related dewatering. Buried pockmarks within the Witch Ground Formation document distinct phases of pockmark formation, likely triggered by external forces related to environmental changes after deglaciation. Thus, greenhouse gas emissions from pockmark fields cannot be based on pockmark numbers and present‐day fluxes but require an analysis of the pockmark forming processes through geological time

Seismic chimney characterisation in the North Sea – Implications for pockmark formation and shallow gas migration

Fluid-escape structures within sedimentary basins permit pressure-driven focused fluid flow through inter-connected faults, fractures and sediment. Seismically-imaged chimneys are recognised as fluid migration pathways which cross-cut overburden stratigraphy, hydraulically connecting deeper strata with the seafloor. However, the geological processes in the sedimentary overburden which control the mechanisms of genesis and temporal evolution require improved understanding. We integrate high resolution 2D and 3D seismic reflection data with sediment core data to characterise a natural, active site of seafloor methane venting in the UK North Sea and Witch Ground Basin, the Scanner pockmark complex. A regional assessment of shallow gas distribution presents direct evidence of active and palaeo-fluid migration pathways which terminate at the seabed pockmarks. We show that these pockmarks are fed from a methane gas reservoir located at 70 metres below the seafloor. We find that the shallow reservoir is a glacial outwash fan, that is laterally sealed by glacial tunnel valleys. Overpressure generation leading to chimney and pockmark genesis is directly controlled by the shallow geological and glaciogenic setting. Once formed, pockmarks act as drainage cells for the underlying gas accumulations. Fluid flow occurs through gas chimneys, comprised of a sub-vertical gas-filled fracture zone. Our findings provide an improved understanding of focused fluid flow and pockmark formation within the sediment overburden, which can be applied to subsurface geohazard assessment and geological storage of CO2

Comparison of stress-dependent geophysical, hydraulic and mechanical properties of synthetic and natural sandstones for reservoir characterization and monitoring studies

Synthetic rock samples can offer advantages over natural rock samples when used for laboratory rock physical properties studies, provided their success as natural analogues is well understood. The ability of synthetic rocks to mimic the natural stress dependency of elastic wave, electrical and fluid transport properties is of primary interest. Hence, we compare a consistent set of laboratory multi‐physics measurements obtained on four quartz sandstone samples (porosity range 20–25%) comprising two synthetic and two natural (Berea and Corvio) samples, the latter used extensively as standards in rock physics research. We measured simultaneously ultrasonic (P‐ and S‐wave) velocity and attenuation, electrical resistivity, permeability and axial and radial strains over a wide range of differential pressure (confining stress 15–50 MPa; pore pressure 5–10 MPa) on the four brine saturated samples. Despite some obvious physical discrepancies caused by the synthetic manufacturing process, such as silica cementation and anisotropy, the results show only small differences in stress dependency between the synthetic and natural sandstones for all measured parameters. Stress dependency analysis of the dry samples using an isotropic effective medium model of spheroidal pores and penny‐shaped cracks, together with a granular cohesion model, provide evidence of crack closure mechanisms in the natural sandstones, seen to a much lesser extent in the synthetic sandstones. The smaller grain size, greater cement content, and cementation under oedometric conditions particularly affect the fluid transport properties of the synthetic sandstones, resulting in lower permeability and higher electrical resistivity for a similar porosity. The effective stress coefficients, determined for each parameter, are in agreement with data reported in the literature. Our results for the particular synthetic materials that were tested suggest that synthetic sandstones can serve as good proxies for natural sandstones for studies of elastic and mechanical properties, but should be used with care for transport properties studies

Assessment of Left Ventricular Geometrical Patterns and Function among Hypertensive Patients at a Tertiary Hospital, Northern Tanzania.

With hypertension, the cardiovascular system changes to adapt to the varying neuro-humoral and hemodynamic changes and this may lead to the development of different left ventricular geometric patterns, each carrying a different risk profile for major adverse cardiovascular events. Using a consecutive sampling technique, a cross-sectional, prospective, hospital based study was done and two hundred and twenty seven (227) hypertensive patients were studied. The distribution of different abnormal LV geometrical patterns was 19.8%, 28.2%, 22% for concentric remodelling, concentric hypertrophy and eccentric hypertrophy respectively. With echocardiographic criteria, the proportion of patients with left ventricular hypertrophy (LVH) was higher when left ventricular mass (LVM) was indexed to height(2.7) than to body surface area (70.0% vs. 52.9%). Duration of hypertension markedly influenced the type of LV geometry with normal LV geometry predominating in early hypertension and abnormal geometrical patterns predominating in late hypertension. The left ventricular fractional shortening decreased with duration of hypertension and was common in patients with eccentric hypertrophy. Age of the patient, systolic blood pressure, duration of hypertension and body mass index were found to be independent predictors left ventricular hypertrophy. About 70% of hypertensive patients had abnormal geometry existing in different patterns. Eccentric hypertrophy had more of clinical and echocardiographic features suggestive of reduced left ventricular systolic function. Hypertensive patients should be recognized as a heterogeneous population and therefore stratifying them into their respective LV geometrical patterns is useful as way of assessing their risk profile as well as instituting appropriate management

Between a reef and a hard place: capacity to map the next coral reef catastrophe

Increasing sea surface temperature and extreme heat events pose the greatest threat to coral reefs globally, with trends exceeding previous norms. The resultant mass bleaching events, such as those evidenced on the Great Barrier Reef in 2016, 2017, and 2020 have substantial ecological costs in addition to economic and social costs. Advancing remote (nanosatellites, rapid revisit traditional satellites) and in-field (drones) technological capabilities, cloud data processing, and analysis, coupled with existing infrastructure and in-field monitoring programs, have the potential to provide cost-effective and timely information to managers allowing them to better understand changes on reefs and apply effective remediation. Within a risk management framework for monitoring coral bleaching, we present an overview of how remote sensing can be used throughout the whole risk management cycle and highlight the role technological advancement has in earth observations of coral reefs for bleaching events

Multiscale characterisation of chimneys/pipes: Fluid escape structures within sedimentary basins

Evaluation of seismic reflection data has identified the presence of fluid escape structures cross-cutting overburden stratigraphy within sedimentary basins globally. Seismically-imaged chimneys/pipes are considered to be possible pathways for fluid flow, which may hydraulically connect deeper strata to the seabed. The properties of fluid migration pathways through the overburden must be constrained to enable secure, long-term subsurface carbon dioxide (CO2) storage. We have investigated a site of natural active fluid escape in the North Sea, the Scanner pockmark complex, to determine the physical characteristics of focused fluid conduits, and how they control fluid flow. Here we show that a multi-scale, multi-disciplinary experimental approach is required for complete characterisation of fluid escape structures. Geophysical techniques are necessary to resolve fracture geometry and subsurface structure (e.g., multi-frequency seismics) and physical parameters of sediments (e.g., controlled source electromagnetics) across a wide range of length scales (m to km). At smaller (mm to cm) scales, sediment cores were sampled directly and their physical and chemical properties assessed using laboratory-based methods. Numerical modelling approaches bridge the resolution gap, though their validity is dependent on calibration and constraint from field and laboratory experimental data. Further, time-lapse seismic and acoustic methods capable of resolving temporal changes are key for determining fluid flux. Future optimisation of experiment resource use may be facilitated by the installation of permanent seabed infrastructure, and replacement of manual data processing with automated workflows. This study can be used to inform measurement, monitoring and verification workflows that will assist policymaking, regulation, and best practice for CO2 subsurface storage operations